SP-170 FI TS GEN successfully passes FAR33 endurance test

The reliability of propulsion systems in unmanned aerial vehicles (UAVs) is critical, as the engines are among the most safety-relevant components. Manufacturers must therefore test their products under realistic load conditions. Sky Power subjected the SP-170 FI TS GEN to extensive FAR33 endurance testing, successfully demonstrating the engines’s high resilience.

The test was conducted on the company’s in-house engine test bench. The engine operated under defined temperature and load cycles designed to simulate typical flight conditions. Throughout the entire test period, specialists continuously monitored all key parameters, including engine speed, telemetry data, fuel consumption, and environmental conditions. After a break-in phase of approximately 30 to 40 hours, the SP-170 FI TS GEN completed the full 150-hour endurance run without any issues. The data collected not only confirms the engine’s airworthiness in accordance with FAA standards, but also provides valuable insights into maintenance intervals, operating costs, and long-term performance.

The SP-170 FI TS GEN is a two-stroke boxer engine with a displacement of 170 cc, designed for UAV systems with a take-off weight between 55 and 85 kilograms. Like all two-cylinder models from Sky Power, it is built on a proven architecture that combines high power density with durability and ease of maintenance. The engine has already demonstrated its reliability in a variety of operating environments, ranging from maritime conditions to desert missions.

The test plan involved daily run times of around eight hours until the total 150-hour duration was achieved. After each test day, the engine underwent visual and functional checks using a standardized checklist to immediately identify and address any deviations. Upon completion of the test series, a detailed final inspection of all components confirmed the engine’s flawless condition.

In addition to the SP-170 FI TS GEN, the single-cylinder SP-55 TS and the two-cylinder SP-110 FI TS GEN and SP-210 FI TS GEN engines also successfully passed a FAR33 endurance test.

SP-170 FI TS GEN on the Sky Power test bench

Related news and blog articles

Published: September 16, 2026
Keyende IM X

Sky Power invests in expansion of its quality assurance capabilities

Sky Power is expanding its quality assurance capabilities with new measuring technology. Automated and reproducible component inspection enables precision-critical components to be checked from the incoming inspection stage onwards.
Read more
Published: September 3, 2026
UAVs with combustion engines in agriculture 1

New Technical Paper: UAV Propulsion Systems for Agriculture

Agricultural UAVs require longer flight times, higher payloads and reliable propulsion systems. Sky Power’s new paper examines the requirements for modern UAV engines in professional agriculture.
Read more
Published: August 25, 2026
SP-110 TS (mit Rotorgraphik) News

New Technical Paper: Carburetor or Electronic Fuel Injection for UAV Engines?

Sky Power’s new technical paper explains how carburetors and electronic fuel injection systems influence efficiency, reliability and performance in high-performance two-stroke UAV engines.
Read more
Published: August 10, 2026
210_HFE_XR.532 (mit Rotorgraphik)

New technical paper: Hybrid UAV Propulsion Systems for Longer Missions

Battery-powered UAVs are efficient, but their endurance is limited by battery energy density. Sky Power’s new technical paper explains how hybrid UAV propulsion systems can extend range, increase payload capacity and open new possibilities for VTOL, ISR, BVLOS and heavy-lift applications.
Read more
Published: July 3, 2026
Long Range UAV

New Paper: Why Long-Range UAVs Still Need Combustion Engines

As UAV missions demand longer flight times, greater range, and higher payload capacities, combustion engines continue to offer significant advantages over battery-powered systems. Learn why internal combustion and hybrid propulsion technologies remain critical for long-endurance UAV applications.
Read more
Published: June 23, 2026
Two-Stroke vs. Wankel Engines for UAVs

New Paper: Push or Pull Configuration in UAVs – Which Approach Delivers the Best Performance?

The positioning of a UAV propeller has a significant impact on flight performance, engine cooling, sensor integration and overall system reliability. Discover the key differences between push and pull configurations in Sky Power International’s latest white paper.
Read more
Skypower brochure cover

Sky Power brochure

Download our newest brochure for free.

Please fill in the fields below to receive an E-Mail containing the brochure download link.

Company name
Full name
Email address (business)
Phone number (optional)
Country
Privacy policy
Newsletter
Position: 0
Slide to 5 to confirm you’re human.